MIRROR
HEATING
FILM
Mirror heating film
Self-adhesive mirror heating film provides a lot of benefits. Learn them all.
Mirror heating film
Self-adhesive mirror heating film provides a lot of benefits. Learn them all.
MIRROR HEATING FILM
TERMOFOL self-adhesive mirror heating film
The heating film prevents water vapour from settling on the mirror surface. Problem-free installation due to self-adhesive film surface.
The film is connected to a light switch, so the electricity consumption is low and no thermoregulator is required.
A mirror with installed film can be hung loosely on the wall surface or glued into the wall façade.
SPECIFICATION
Model |
Dimension |
Power |
Ohms |
Voltage |
Amp |
|---|---|---|---|---|---|
TF-AF-1 |
400x400mm |
30 W |
1,76kΩ |
230V |
130mA |
TF-AF-2 |
400x600mm |
44 W |
1,20kΩ |
230V |
191mA |
TF-AF-3 |
520x520mm |
45 W |
1,18kΩ |
230V |
195mA |
TF-AF-4 |
640x640mm |
100 W |
529Ω |
230V |
434mA |
TF-AF-5 |
540x800mm |
88 W |
382Ω |
230V |
601mA |
TF-AF-6 |
700x900mm |
108 W |
489Ω |
230V |
469mA |
VISUALISATION OF THE MIRROR HEATING FILM INSTALLATION
• Peel the protective film off the surface of the heating film
• Attach the heating film to the mirror surface
NOTE! Mirror edges must be free of heating film, it cannot cover the entire mirror surface!
• Apply the installation adhesive to the mirror edges
• Connect the film to a power supply – to a light switch.
• Fix the mirror to a wall
NOTE! The film must be connected by an authorized electrician.
FAQ
No, usually films are connected to a light switch.
No, the dimension is fixed and it is not allowed to shorten the product.
Yes, the film has a layer of self-adhesive tape and is ready for installation after purchase.
The mirror should be fixed with an installation adhesive.
When selecting the heating film for the mirror size, the installation distance from mirror edges should be at least 10 cm. For example, for a mirror with a size of 60×60 cm a film with a size of 40×40 cm is selected.
The mirror film has an IP54 protection level.
