THERMOREGULATORS
TERMOFOL

Heating temperature controllers

Precise heating with Termofol heating system.

Technical specifications

Read the technical details of the thermoregulators.

HEATING TEMPERATURE CONTROLLERS

Precise control of the electric heating system is performed by means of a thermostat – temperature controller. It allows the set air or floor temperature to be maintained automatically. Each circuit is an independent heating system, which we can individually adapt to our needs. In the case of direct heating, the low thermal inertia makes controlling the floor temperature simple and very precise. During the stay of the household members at work or during the night, temperature may be reduced by means of programmable electronic thermoregulators with a clock, which allow for easy programming of temperature reduction at the right time. Thermoregulator with built-in WiFi module – TERMOFOL TF-WiFi enables remote programming from an application in your smartphone.

TYPES OF THERMOSTATS AND APPLICATIONS

Electronic programmable thermostat

Recommended for electric heating systems to ensure maximum thermal comfort. Real-time programming provides the temperature you set when you need it. When using a thermostat with a programmer, e.g. TF-H1 or TF-WiFi, you get a comfortable temperature at specified hours. The programmable thermoregulator is economical to use. The thermostat switches on the heating for a few hours during the day, when we are in the living room for example, and during the rest of the day we reduce the temperature in order to minimize the operating costs. Thermostats with a programmer are a bit more expensive, but the investment pays for itself quickly because traditional thermostats keep the temperature throughout the day.

Floor sensor thermostat

recommended for the control of electric underfloor heating, the purpose of which is to ensure the comfort of a warm floor – e.g. in the bathroom.

Thermostat with two sensors (air and floor)

recommended for heating when it is the only heat source. The thermoregulator maintains the set air temperature, while limiting the floor temperature.

Air sensor thermostat

recommended for wall, ceiling and radiant heating.


NEW!

Smart thermostat TERMOFOL TF-H6 WIFI

Modern cooperating room thermostat with electric heating systems

TERMOFOL TF-H6 WIFI is the perfect device for advanced control of your heating system. Our engineers’ many years of experience have allowed us to create an advanced thermostat equipped with non-standard functionalities. Increase your and your family’s comfort, minimize heat loss and enjoy from a perfect device offering many innovative solutions.

Temperature adjusted to your needs

The thermostat can be freely programmed with the weekly work schedule. The entered schedule is repeated every week, so you forget about manually setting the temperature.

Electric energy usage 20% lower

The electronic thermostat optimizes electricity consumption by switching the heating on only while the rooms are in use, avoiding unproductive space heating.

H6-WIFI-wnetrze-kopia.jpg
TFH1.png

SPECIFICATION

THERMOREGULATOR TF-H1

  • Power consumption:  < 1.5 W
  • Temperature range: 5 – 35 °C
  • Limiting the heater maximum temperature – floor: 10 °C – 70 °C
  • 2 sensors: built-in air temperature sensor + NTC floor temperature sensor
  • Maximum output load: 16A
  • Protection level: IP20
  • Power supply: 230 AC
  • Touch button control
  • 5+2 temperature programming (5 week days + weekend)
  • Installation: flush-mounted – in an installation box
  • Warranty: 24 months
  • Slim shape – only 12 mm thick!
  • Snow white
  • Blue illumination
  • Blue button illumination
  • Signalling – heating on
  • Possibility of manual temperature control
  • External floor sensor included!
  • Thermoregulator with built-in temperature sensor
  • External floor temperature sensor with cable
  • Box
  • Installation screws
  • Instructions in English

SPECIFICATION

THERMOREGULATOR TF-H2

  • Power consumption: <2 VA
  • Temperature range: 5 – 40 °C
  • Limiting the heater maximum temperature – floor: 40 °C
  • 2 sensors: built-in air temperature sensor + NTC floor temperature sensor
  • Maximum output load: 16A
  • Protection level: IP21 – can be installed in bathrooms
  • Dimensions: 86×86 mm
  • Thickness: 12mm
  • Power supply: 230 AC
  • Manual control via knobs
  • No programming, simple temperature change
  • Installation: surface mounted!
  • Warranty: 24 months
  • Signalling with a LED
  • External floor sensor included!
  • Thermoregulator with built-in temperature sensor
  • External floor temperature sensor with cable
  • Box
  • Installation screws
  • Instructions in English
  • Warranty Card
TF-H2..png
TFH3.png

SPECIFICATION

THERMOREGULATOR TF-H3

  • Power consumption: <2 VA
  • Temperature range: 5 – 40 °C
  • NTC floor temperature sensor
  • Maximum output load: 16A
  • Protective housing: IP21 – can be installed in bathrooms
  • Dimensions: 86×86 mm
  • Thickness: 12mm
  • Power supply: 230 AC
  • Manual control via knobs
  • No programming, simple temperature change
  • Installation: flush-mounted – in an installation box
  • Warranty: 24 months
  • Slim shape – only 12 mm thick!
  • Snow white
  • Signalling with a LED
  • External floor sensor included!
  • Thermoregulator
  • External floor temperature sensor with cable
  • Box
  • Installation screws
  • Instructions in English
  • Warranty Card

SPECIFICATION

TF-WIFI THERMOREGULATOR

  • Power consumption: < 1.5 W
  • Temperature range: 5 – 35 °C
  • Limiting the heater maximum temperature – floor: 10 °C – 70 °C
  • 2 sensors: built-in air temperature sensor + NTC floor temperature sensor
  • Maximum output load: 16A
  • Protective level: IP20
  • Power supply: 230 AC
  • Touch button control
  • Installation: flush-mounted – in an installation box
  • Warranty: 24 months
  • Slim shape – only 12 mm thick!
  • Black front panel
  • Blue illumination with adjustable backlight time
  • Signalling – heating on
  • Possibility of manual temperature control
  • Allows protection against temperature drop and rise
  • Adjustable hysteresis
  • Displays date and time
  • External floor sensor included!
  • Thermoregulator with built-in temperature sensor
  • External floor temperature sensor with cable
  • Box
  • Installation screws
  • Instructions in English
tfwifi.png
termoregulator-h6.png

SPECIFICATION

THERMOREGULATOR TF-H6

A high-class, fully programmable concealed thermoregulator with IP31 protection rating, which enables the device to be installed inside the bathroom. This parameter is very important because most of the available devices have the IP20 degree of protection and such devices cannot be installed inside the bathroom.

  • Power consumption <1.5 W
  • Temperature range: 5–35 °C
  • Heater maximum temperature limitation – floors 10 °C – 70 °C
  • 2 sensors: built-in air temperature sensor + floor temperature sensor – NTC sensor
  • Maximum output load: 16A
  • Degree of protection: IP20
  • Power supply: 230 AC
  • Touch buttons control,
  • Temperature programming 5 + 2/6 + 1/7 days,
  • Flush mounting – in the installation box,
  • Warranty: 24 months,
  • Slim shape – only 12mm thick,
  • Snow white color,
  • White backlight,
  • Signaling – heating turned on,
  • Possibility of manual temperature control,
  • Can be installed in multiple frames,
  • External sensor – floor included.
  • Thermoregulator
  • External floor temperature sensor with cable
  • Box
  • Installation screws
  • Instructions in English
  • Warranty Card

SPECIFICATION

THERMOREGULATOR TF-H6 WIFI

The thermostat can be freely programmed with the weekly work schedule. The entered schedule is repeated every week, so you forget about manually setting the temperature. It is important to be able to change the temperature temporarily. The TF-H6 WIFI thermostat protects household members against potential overheating of the heating system and informs about any irregularities related to the installation. In the event of a failure of the outdoor temperature sensor, the thermostat displays a message and turns off the heating system, so you can be sure that the installation is always safe. The device works with the TERMOFOL Smart and Tuya Smart applications.

  • Power consumption: <1.5 W
  • Temperature range: 1-70 ° C,
  • Maximum temperature limitation heaters – floors: 20 ° C – 70 ° C,
  • 2 sensors: built-in temperature sensor air + floor temperature sensor NTC sensor,
  • Maximum load on the output: 16A,
  • Degree of protection: IP31,
  • Power supply: 230 AC,
  • Hysteresis: 0.5–2.5 ° C,
  • Hysteresis of the external sensor: 1-9 ° C.
  • Touch buttons control,
  • Temperature programming 5 + 2/6 + 1/7 days,
  • Installation method: flush-mounted – in the
    installation box,
  • Warranty: 24 months,
  • Slim shape – only 12mm thick,
  • Snow white color,
  • White backlight,
  • Signaling – heating turned on,
  • Possibility of manual temperature control,
  • Can be installed in multiple frames
    (different manufacturers),
  • External sensor – floor included.
  • Thermoregulator with built-in temperature sensor
  • External floor temperature sensor with cable
  • Box
  • Installation screws
  • Instructions in English
termoregulator-h6-wifi.png

FAQ

As the name suggests, the role of the thermostat is to keep the temperature at a pre-set level. In the case of an electronic thermoregulator, this is much more precise because, depending on your needs, you can program the temperature controller to lower or raise the temperature in a range of specific values.

Each thermoregulator is additionally equipped with a sensor, which allows to monitor the temperature values in a given place in real time. Depending on this, it increases or decreases the heating capacity. In addition, models equipped with electronic clock thermoregulators allow you to set a specific temperature value at a specific time. So, do you want your house warm when you get home from work? No problem – just select the right temperature and program it for a specific time!

One of the information we always find in the electronic thermostat technical data are their operating modes. They are hidden under enigmatic names in English, for example FLOOR, ROOM or ALL. How to understand these parameters?

FLOOR mode means that the floor temperature sensor is active. This mode is activated when the electronic thermostat is programmed to control the underfloor heating. When FLOOR mode is activated, the other modes are inactive – for example, the internal temperature sensor operation. It is described below!

The ROOM mode, which we briefly mentioned above, simply means the operation of the internal temperature sensor. This one controls the heat in a given room. It is activated when a particular thermostat is used to control a temperature other than the underfloor heating of the module.

What is the ALL mode? This is an indication of the simultaneous operation of two different sensors. The internal one is designed to check the room temperature, while the floor one controls the floor temperature. The ALL mode is used when the underfloor heating is to be the main room heating system.

What types of thermostats are available on the market? For which specific applications can they be used? Below we present the most important features of various types of electronic thermostats:

1. For a warm floor – a device equipped with a floor sensor is an ideal solution. It’s the best option to control underfloor heating in a bathroom or other places.

2. For wall heating – the best solution here will definitely be a thermostat equipped with an air sensor.

3. For ceiling heating – in this case it is worth using electronic thermostats with an air sensor.

4. For heating by means of radiant heaters – another situation where an electronic thermostat with an air sensor will work perfectly.

A thermostat must be installed in each room. This guarantees the highest thermal comfort and minimises operating costs.

It is very convenient to have a thermostat that allows to set the selected temperature at a specific time of day. Imagine you wake up on a cold winter morning and your house is pleasantly warm. Or you come back on a hot summer afternoon and staying home gives you a nice feeling of relief from the heat. There is nothing to hide – temperature programming is primarily a convenience.

However, it is worth remembering that investment in heat control electronics can also bring measurable financial benefits. You don’t have to worry about the high heating bills, which were so annoying for you even when you had to keep your radiators on all day, even though no one was home.

With this thermoregulator you can quickly and easily program the temperature exactly as you need it. Whenever you want. It’s a really big saving on bills. Electronic temperature controllers will quickly and efficiently set the right heat value for you.

Yes, the Tuya Smart application is compatible with our thermoregulator.

A thermoregulator installed in a bathroom must have protection class IP21.

A thermoregulator should be installed 120 cm from the ground.

Yes. If you have access to the Internet you can control your heating system from anywhere.

With the TF-H1 and TF-WiFi thermostats it is possible to block the device from unauthorized persons.

Check TERMOFOL heating system elements: